f2838x_eth_driver.c File Reference

TMS320F2838xD Ethernet MAC driver. More...

#include "inc/hw_emac.h"
#include "inc/hw_emac_ss.h"
#include "inc/hw_ints.h"
#include "inc/hw_memmap.h"
#include "inc/hw_types.h"
#include "driverlib_cm/interrupt.h"
#include "driverlib_cm/sysctl.h"
#include "core/net.h"
#include "drivers/mac/f2838x_eth_driver.h"
#include "debug.h"

Go to the source code of this file.

Macros

#define TRACE_LEVEL   NIC_TRACE_LEVEL
 

Functions

error_t f2838xEthInit (NetInterface *interface)
 TMS320F2838xD Ethernet MAC initialization. More...
 
__weak_func void f2838xEthInitGpio (NetInterface *interface)
 GPIO configuration. More...
 
void f2838xEthInitDmaDesc (NetInterface *interface)
 Initialize DMA descriptor lists. More...
 
void f2838xEthTick (NetInterface *interface)
 TMS320F2838xD Ethernet MAC timer handler. More...
 
void f2838xEthEnableIrq (NetInterface *interface)
 Enable interrupts. More...
 
void f2838xEthDisableIrq (NetInterface *interface)
 Disable interrupts. More...
 
__interrupt void f2838xEthIrqHandler (void)
 TMS320F2838xD Ethernet MAC interrupt service routine. More...
 
void f2838xEthEventHandler (NetInterface *interface)
 TMS320F2838xD Ethernet MAC event handler. More...
 
error_t f2838xEthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary)
 Send a packet. More...
 
error_t f2838xEthReceivePacket (NetInterface *interface)
 Receive a packet. More...
 
error_t f2838xEthUpdateMacAddrFilter (NetInterface *interface)
 Configure MAC address filtering. More...
 
error_t f2838xEthUpdateMacConfig (NetInterface *interface)
 Adjust MAC configuration parameters for proper operation. More...
 
void f2838xEthWritePhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data)
 Write PHY register. More...
 
uint16_t f2838xEthReadPhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr)
 Read PHY register. More...
 
uint32_t f2838xEthCalcCrc (const void *data, size_t length)
 CRC calculation. More...
 

Variables

const NicDriver f2838xEthDriver
 TMS320F2838xD Ethernet MAC driver. More...
 

Detailed Description

TMS320F2838xD Ethernet MAC driver.

License

SPDX-License-Identifier: GPL-2.0-or-later

Copyright (C) 2010-2024 Oryx Embedded SARL. All rights reserved.

This file is part of CycloneTCP Open.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Author
Oryx Embedded SARL (www.oryx-embedded.com)
Version
2.4.4

Definition in file f2838x_eth_driver.c.

Macro Definition Documentation

◆ TRACE_LEVEL

#define TRACE_LEVEL   NIC_TRACE_LEVEL

Definition at line 32 of file f2838x_eth_driver.c.

Function Documentation

◆ f2838xEthCalcCrc()

uint32_t f2838xEthCalcCrc ( const void *  data,
size_t  length 
)

CRC calculation.

Parameters
[in]dataPointer to the data over which to calculate the CRC
[in]lengthNumber of bytes to process
Returns
Resulting CRC value

Definition at line 929 of file f2838x_eth_driver.c.

◆ f2838xEthDisableIrq()

void f2838xEthDisableIrq ( NetInterface interface)

Disable interrupts.

Parameters
[in]interfaceUnderlying network interface

Definition at line 395 of file f2838x_eth_driver.c.

◆ f2838xEthEnableIrq()

void f2838xEthEnableIrq ( NetInterface interface)

Enable interrupts.

Parameters
[in]interfaceUnderlying network interface

Definition at line 362 of file f2838x_eth_driver.c.

◆ f2838xEthEventHandler()

void f2838xEthEventHandler ( NetInterface interface)

TMS320F2838xD Ethernet MAC event handler.

Parameters
[in]interfaceUnderlying network interface

Definition at line 480 of file f2838x_eth_driver.c.

◆ f2838xEthInit()

error_t f2838xEthInit ( NetInterface interface)

TMS320F2838xD Ethernet MAC initialization.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 120 of file f2838x_eth_driver.c.

◆ f2838xEthInitDmaDesc()

void f2838xEthInitDmaDesc ( NetInterface interface)

Initialize DMA descriptor lists.

Parameters
[in]interfaceUnderlying network interface

Definition at line 286 of file f2838x_eth_driver.c.

◆ f2838xEthInitGpio()

__weak_func void f2838xEthInitGpio ( NetInterface interface)

GPIO configuration.

Parameters
[in]interfaceUnderlying network interface

Definition at line 273 of file f2838x_eth_driver.c.

◆ f2838xEthIrqHandler()

__interrupt void f2838xEthIrqHandler ( void  )

TMS320F2838xD Ethernet MAC interrupt service routine.

Definition at line 427 of file f2838x_eth_driver.c.

◆ f2838xEthReadPhyReg()

uint16_t f2838xEthReadPhyReg ( uint8_t  opcode,
uint8_t  phyAddr,
uint8_t  regAddr 
)

Read PHY register.

Parameters
[in]opcodeAccess type (2 bits)
[in]phyAddrPHY address (5 bits)
[in]regAddrRegister address (5 bits)
Returns
Register value

Definition at line 877 of file f2838x_eth_driver.c.

◆ f2838xEthReceivePacket()

error_t f2838xEthReceivePacket ( NetInterface interface)

Receive a packet.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 567 of file f2838x_eth_driver.c.

◆ f2838xEthSendPacket()

error_t f2838xEthSendPacket ( NetInterface interface,
const NetBuffer buffer,
size_t  offset,
NetTxAncillary ancillary 
)

Send a packet.

Parameters
[in]interfaceUnderlying network interface
[in]bufferMulti-part buffer containing the data to send
[in]offsetOffset to the first data byte
[in]ancillaryAdditional options passed to the stack along with the packet
Returns
Error code

Definition at line 505 of file f2838x_eth_driver.c.

◆ f2838xEthTick()

void f2838xEthTick ( NetInterface interface)

TMS320F2838xD Ethernet MAC timer handler.

This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state

Parameters
[in]interfaceUnderlying network interface

Definition at line 337 of file f2838x_eth_driver.c.

◆ f2838xEthUpdateMacAddrFilter()

error_t f2838xEthUpdateMacAddrFilter ( NetInterface interface)

Configure MAC address filtering.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 642 of file f2838x_eth_driver.c.

◆ f2838xEthUpdateMacConfig()

error_t f2838xEthUpdateMacConfig ( NetInterface interface)

Adjust MAC configuration parameters for proper operation.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 788 of file f2838x_eth_driver.c.

◆ f2838xEthWritePhyReg()

void f2838xEthWritePhyReg ( uint8_t  opcode,
uint8_t  phyAddr,
uint8_t  regAddr,
uint16_t  data 
)

Write PHY register.

Parameters
[in]opcodeAccess type (2 bits)
[in]phyAddrPHY address (5 bits)
[in]regAddrRegister address (5 bits)
[in]dataRegister value

Definition at line 831 of file f2838x_eth_driver.c.

Variable Documentation

◆ f2838xEthDriver

void f2838xEthEnableIrq(NetInterface *interface)
Enable interrupts.
#define TRUE
Definition: os_port.h:50
void f2838xEthTick(NetInterface *interface)
TMS320F2838xD Ethernet MAC timer handler.
error_t f2838xEthUpdateMacAddrFilter(NetInterface *interface)
Configure MAC address filtering.
void f2838xEthEventHandler(NetInterface *interface)
TMS320F2838xD Ethernet MAC event handler.
void f2838xEthDisableIrq(NetInterface *interface)
Disable interrupts.
#define FALSE
Definition: os_port.h:46
error_t f2838xEthSendPacket(NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary)
Send a packet.
uint16_t f2838xEthReadPhyReg(uint8_t opcode, uint8_t phyAddr, uint8_t regAddr)
Read PHY register.
#define ETH_MTU
Definition: ethernet.h:116
error_t f2838xEthInit(NetInterface *interface)
TMS320F2838xD Ethernet MAC initialization.
@ NIC_TYPE_ETHERNET
Ethernet interface.
Definition: nic.h:83
error_t f2838xEthUpdateMacConfig(NetInterface *interface)
Adjust MAC configuration parameters for proper operation.
void f2838xEthWritePhyReg(uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data)
Write PHY register.