Renesas RA8M1 / RA8D1 / RA8T1 Ethernet MAC driver. More...
#include "bsp_api.h"
#include "core/net.h"
#include "drivers/mac/ra8_eth_driver.h"
#include "debug.h"
Go to the source code of this file.
Macros | |
#define | TRACE_LEVEL NIC_TRACE_LEVEL |
Functions | |
error_t | ra8EthInit (NetInterface *interface) |
RA8 Ethernet MAC initialization. More... | |
__weak_func void | ra8EthInitGpio (NetInterface *interface) |
GPIO configuration. More... | |
void | ra8EthInitDmaDesc (NetInterface *interface) |
Initialize DMA descriptor lists. More... | |
void | ra8EthTick (NetInterface *interface) |
RA8 Ethernet MAC timer handler. More... | |
void | ra8EthEnableIrq (NetInterface *interface) |
Enable interrupts. More... | |
void | ra8EthDisableIrq (NetInterface *interface) |
Disable interrupts. More... | |
void | EDMAC0_EINT_IRQHandler (void) |
RA8 Ethernet MAC interrupt service routine. More... | |
void | ra8EthEventHandler (NetInterface *interface) |
RA8 Ethernet MAC event handler. More... | |
error_t | ra8EthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary) |
Send a packet. More... | |
error_t | ra8EthReceivePacket (NetInterface *interface) |
Receive a packet. More... | |
error_t | ra8EthUpdateMacAddrFilter (NetInterface *interface) |
Configure MAC address filtering. More... | |
error_t | ra8EthUpdateMacConfig (NetInterface *interface) |
Adjust MAC configuration parameters for proper operation. More... | |
void | ra8EthWritePhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data) |
Write PHY register. More... | |
uint16_t | ra8EthReadPhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr) |
Read PHY register. More... | |
void | ra8EthWriteSmi (uint32_t data, uint_t length) |
SMI write operation. More... | |
uint32_t | ra8EthReadSmi (uint_t length) |
SMI read operation. More... | |
Variables | |
const NicDriver | ra8EthDriver |
RA8 Ethernet MAC driver. More... | |
Detailed Description
Renesas RA8M1 / RA8D1 / RA8T1 Ethernet MAC driver.
License
SPDX-License-Identifier: GPL-2.0-or-later
Copyright (C) 2010-2024 Oryx Embedded SARL. All rights reserved.
This file is part of CycloneTCP Open.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- Version
- 2.4.4
Definition in file ra8_eth_driver.c.
Macro Definition Documentation
◆ TRACE_LEVEL
#define TRACE_LEVEL NIC_TRACE_LEVEL |
Definition at line 32 of file ra8_eth_driver.c.
Function Documentation
◆ EDMAC0_EINT_IRQHandler()
void EDMAC0_EINT_IRQHandler | ( | void | ) |
RA8 Ethernet MAC interrupt service routine.
Definition at line 585 of file ra8_eth_driver.c.
◆ ra8EthDisableIrq()
void ra8EthDisableIrq | ( | NetInterface * | interface | ) |
Disable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 558 of file ra8_eth_driver.c.
◆ ra8EthEnableIrq()
void ra8EthEnableIrq | ( | NetInterface * | interface | ) |
Enable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 530 of file ra8_eth_driver.c.
◆ ra8EthEventHandler()
void ra8EthEventHandler | ( | NetInterface * | interface | ) |
RA8 Ethernet MAC event handler.
- Parameters
-
[in] interface Underlying network interface
Definition at line 638 of file ra8_eth_driver.c.
◆ ra8EthInit()
error_t ra8EthInit | ( | NetInterface * | interface | ) |
RA8 Ethernet MAC initialization.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 118 of file ra8_eth_driver.c.
◆ ra8EthInitDmaDesc()
void ra8EthInitDmaDesc | ( | NetInterface * | interface | ) |
Initialize DMA descriptor lists.
- Parameters
-
[in] interface Underlying network interface
Definition at line 449 of file ra8_eth_driver.c.
◆ ra8EthInitGpio()
__weak_func void ra8EthInitGpio | ( | NetInterface * | interface | ) |
GPIO configuration.
- Parameters
-
[in] interface Underlying network interface
Definition at line 232 of file ra8_eth_driver.c.
◆ ra8EthReadPhyReg()
uint16_t ra8EthReadPhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr | ||
) |
Read PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits)
- Returns
- Register value
Definition at line 947 of file ra8_eth_driver.c.
◆ ra8EthReadSmi()
uint32_t ra8EthReadSmi | ( | uint_t | length | ) |
SMI read operation.
- Parameters
-
[in] length Number of bits to be read
- Returns
- Data resulting from the MDIO read operation
Definition at line 1020 of file ra8_eth_driver.c.
◆ ra8EthReceivePacket()
error_t ra8EthReceivePacket | ( | NetInterface * | interface | ) |
Receive a packet.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 731 of file ra8_eth_driver.c.
◆ ra8EthSendPacket()
error_t ra8EthSendPacket | ( | NetInterface * | interface, |
const NetBuffer * | buffer, | ||
size_t | offset, | ||
NetTxAncillary * | ancillary | ||
) |
Send a packet.
- Parameters
-
[in] interface Underlying network interface [in] buffer Multi-part buffer containing the data to send [in] offset Offset to the first data byte [in] ancillary Additional options passed to the stack along with the packet
- Returns
- Error code
Definition at line 663 of file ra8_eth_driver.c.
◆ ra8EthTick()
void ra8EthTick | ( | NetInterface * | interface | ) |
RA8 Ethernet MAC timer handler.
This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state
- Parameters
-
[in] interface Underlying network interface
Definition at line 505 of file ra8_eth_driver.c.
◆ ra8EthUpdateMacAddrFilter()
error_t ra8EthUpdateMacAddrFilter | ( | NetInterface * | interface | ) |
Configure MAC address filtering.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 809 of file ra8_eth_driver.c.
◆ ra8EthUpdateMacConfig()
error_t ra8EthUpdateMacConfig | ( | NetInterface * | interface | ) |
Adjust MAC configuration parameters for proper operation.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 874 of file ra8_eth_driver.c.
◆ ra8EthWritePhyReg()
void ra8EthWritePhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr, | ||
uint16_t | data | ||
) |
Write PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits) [in] data Register value
Definition at line 917 of file ra8_eth_driver.c.
◆ ra8EthWriteSmi()
void ra8EthWriteSmi | ( | uint32_t | data, |
uint_t | length | ||
) |
SMI write operation.
- Parameters
-
[in] data Raw data to be written [in] length Number of bits to be written
Definition at line 980 of file ra8_eth_driver.c.