stm32wbxx_crypto_trng.c

Go to the documentation of this file.

/**
 * @file stm32wbxx_crypto_trng.c
 * @brief STM32WB true random number generator
 *
 * @section License
 *
 * SPDX-License-Identifier: GPL-2.0-or-later
 *
 * Copyright (C) 2010-2024 Oryx Embedded SARL. All rights reserved.
 *
 * This file is part of CycloneCRYPTO Open.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 *
 * @author Oryx Embedded SARL (www.oryx-embedded.com)
 * @version 2.4.4
 **/
 
//Switch to the appropriate trace level
#define TRACE_LEVEL CRYPTO_TRACE_LEVEL
 
//Dependencies
#include "stm32wbxx.h"
#include "stm32wbxx_hal.h"
#include "core/crypto.h"
#include "hardware/stm32wbxx/stm32wbxx_crypto.h"
#include "hardware/stm32wbxx/stm32wbxx_crypto_trng.h"
#include "debug.h"
 
//Check crypto library configuration
#if (STM32WBXX_CRYPTO_TRNG_SUPPORT == ENABLED)
 
//Global variable
static RNG_HandleTypeDef RNG_Handle;
 
 
/**
 * @brief TRNG module initialization
 * @return Error code
 **/
 
error_t trngInit(void)
{
   HAL_StatusTypeDef status;
 
   //Enable RNG peripheral clock
   __HAL_RCC_RNG_CLK_ENABLE();
 
   //Set instance
   RNG_Handle.Instance = RNG;
 
   //Reset RNG module
   status = HAL_RNG_DeInit(&RNG_Handle);
 
   //Check status code
   if(status == HAL_OK)
   {
      //Initialize RNG module
      status = HAL_RNG_Init(&RNG_Handle);
   }
 
   //Return status code
   return (status == HAL_OK) ? NO_ERROR : ERROR_FAILURE;
}
 
 
/**
 * @brief Get random data from the TRNG module
 * @param[out] data Buffer where to store random data
 * @param[in] length Number of random bytes to generate
 **/
 
error_t trngGetRandomData(uint8_t *data, size_t length)
{
   size_t i;
   uint32_t value;
   HAL_StatusTypeDef status;
 
   //Initialize status code
   status = HAL_OK;
 
   //Acquire exclusive access to the RNG module
   osAcquireMutex(&stm32wbxxCryptoMutex);
 
   //Generate random data
   for(i = 0; i < length; i++)
   {
      //Generate a new 32-bit random value when necessary
      if((i % 4) == 0)
      {
         //Get 32-bit random value
         status = HAL_RNG_GenerateRandomNumber(&RNG_Handle, &value);
         //Check status code
         if(status != HAL_OK)
         {
            break;
         }
      }
 
      //Copy random byte
      data[i] = value & 0xFF;
      //Shift the 32-bit random value
      value >>= 8;
   }
 
   //Release exclusive access to the RNG module
   osReleaseMutex(&stm32wbxxCryptoMutex);
 
   //Return status code
   return (status == HAL_OK) ? NO_ERROR : ERROR_FAILURE;
}
 
#endif