News

Keep up to date about Oryx Embedded

Read our latest news

Product Launch CycloneEAP 802.1X EAP

Embedded 802.1X / EAP Library for MCU

Our new product CycloneEAP is an 802.1X / EAP library dedicated to embedded applications. It can be deployed in a corporate LAN where port-based access control is required via authentication. The library is distributed as a full ANSI C and highly maintainable source code, and is available either as open source (GPLv2, Evaluation) or under a royalty-free commercial license.

More details on CycloneEAP

Released on February 12, 2024
Major Update CycloneBOOT IAP Firmware Update on STM32 MCU

Secure Bootloader for MCU | Version 3

CycloneBOOT is a firmware update solution targetting 32-bit microcontrollers, including an In-Application Programming (IAP) Library and a secure Bootloader. This version 3 is a major update based on a new architecture (reorganization of memory related functions for more flexibility and portability across different use cases). Several demonstration projects are available for various STM32 evaluation boards, emphasizing firmware updates via Ethernet or UART.

More details on CycloneBOOT

Released on December 18, 2023
Product Launch CycloneIPSEC IPsec IKev2 VPN Internet

IPsec / IKEv2 Library for MCU

Our new product CycloneIPSEC is an IPsec / IKEv2 library dedicated to embedded applications. IPsec is a suite of protocols used to implement secure communication between two sites over the Internet. IPsec works at the network layer of the OSI model. The library is distributed as a full ANSI C and highly maintainable source code, and is available either as open source (GPLv2, Evaluation) or under a royalty-free commercial license.

More details on CycloneIPSEC

Released on June 12, 2023
New supported MCU
ST STM32 Logo ST STM32H5 Series

Full support for new STM32H5 MCU series

STMicroelectronics has just introduced its new performance-oriented STM32H5 microcontroller series. Oryx Embedded will demonstrate at Embedded World 2023 (March 14-16) its secure networking solutions portfolio (TCP / SSL / SSH / CRYPTO / BOOT) running on NUCLEO-H563ZI and STM32H573I-DK Discovery kit.

Access Crypto Benchmark on STM32H5
Software Crypto Benchmark: STM32F4 vs STM32H5

Published on March 07, 2023
Event EMBEDDDED WORLD 2023 ORYX

ORYX at Embedded World 2023

Oryx Embedded will exhibit at the annual Embedded World 2023 Conference & Exhibition from March 14 to 16 in Nuremberg, Germany. You can meet our team at stand No. 4-445 (Hall 4, Safety & Security area) along with demonstration projects showcasing our connectivity and security solutions on various MCUs.

Published on February 09, 2023
Message HAPPY NEW YEAR 2023 Photo credit: Yann Caradec

Happy New Year 2023

Oryx Embedded wishes you a Happy New Year 2023! We hope all your dreams come true in 2023. Onwards and upwards!

New products coming soon!

Published on January 02, 2023
Event EMBEDDDED WORLD 2022 ORYX

ORYX at Embedded World 2022

Oryx Embedded will exhibit at the annual Embedded World Electronics Conference & Exhibition from June 21 to 23 in Nuremberg, Germany. You can meet our team at stand No. 4-445 (Hall 4, Safety & Security area) along with demonstration projects showcasing our connectivity and security solutions.

Published on May 31, 2022
Crypto Benchmark on ARM Cortex-M & PIC32 MCUs CycloneBOOT IAP Firmware Update on STM32 MCU

Benchmarks & Hardware Crypto Acceleration

To help our users in qualifying performance of CycloneCRYPTO (cryptographic library), CycloneSSL (TLS/DTLS library) and CycloneSSH (SSH library), we now provide benchmarks for our crypto algorithms running on various hardware devices (ST STM32 series, Microchip SAM series & PIC32MX / PIC32MZ, NXP i.MX RT & K6x series, Silabs EFM32, Renesas RA & Synergy series, TI Tiva TM4C129 & MSP432). In the comparison charts, both hardware (using MCU built-in crypto engine) and software performance are presented.

ST Logo MICROCHIP Logo NXP Logo Silabs Logo RENESAS Logo TI Logo

Access Crypto Benchmark on various MCUs

List of Supported Crypto Hardware Accelerators

Released on October 22, 2021
Product Launch CycloneBOOT IAP Firmware Update on STM32 MCU

Secure Bootloader for MCU

CycloneBOOT is a secure bootloader targetting 32-bit microcontrollers. Firmware update can be done via various TCP/IP protocols on multiple network interfaces (Ethernet LAN, Wi-Fi, Cellular Modem...)

We release a first CycloneBOOT demonstration package for In-Application Programming (IAP) on STM32 with dual bank flash capability. Our IAP library is embedded in HTTP server or HTTPS client application. The current demos run on STM32F4 and STM32F7 Nucleo evaluations boards.

ST STM32 Logo

More details on CycloneBOOT

Released on April 09, 2021
Webinar CycloneSSL TLS 1.3 webinar

Focus on TLS 1.3

This webinar, organized with LIVE EMBEDDED, will focus on TLS 1.3 updates. TLS 1.3 is the most important security protocol on the Internet, delivering superior privacy, security, and performance. TLS 1.3 is an improvement over TLS 1.2 and TLS 1.1. It was defined in RFC 8446 in August 2018.

  • TLS Protocol Status & History
  • Version Intolerance & TLS Version Fallback
  • TLS 1.3 Motivations
  • TLS 1.3 Handshake
  • TLS Version & Cipher Suite Negotiation
  • TLS 1.3 Deployment (See also www.ssllabs.com/ssl-pulse/)

More details on CycloneSSL

Contact us if you wish to get the PDF presentation

Live event on December 3, 2020
Product Launch CycloneSSH SSH v2 client/server

SSH version 2.0 client/server implementation

Our new product CycloneSSH is a SSHv2 library dedicated to embedded applications. It can be used to operate network services such as remote shell and file transfer (SFTP, SCP) over an unsecured network. The library is distributed as a full ANSI C and highly maintainable source code, and is available either as open source (GPLv2, Evaluation) or under a royalty-free commercial license.

More details on CycloneSSH

Released on November 5, 2020
Product Launch CycloneSTP STP & RSTP protocols

Spanning Tree Protocol Library (STP & RSTP)

Our new product CycloneSTP is an implementation of STP (Spanning Tree Protocol) and RSTP (Rapid Spanning Tree Protocol) algorithms suitable for resource-constrained microcontrollers. STP and RSTP are network protocols that can be implemented on Ethernet bridges to ensure loop-free LAN topologies. The library is distributed as a full ANSI C and highly maintainable source code, and is available either as open source (GPLv2, Evaluation) or under a royalty-free commercial license.

More details on CycloneSTP

Released on July 16, 2020
Product Launch CycloneSTP STP & RSTP protocols

Automatic Certificate Management (ACME)

Our new product CycloneACME is a client implementation of ACME (Automatic Certificate Management Environment) dedicated to embedded applications. This solution can be used to automate the process of managing X.509 certificates (ordering, renewal, revocation) with a remote certification authority like Let's Encrypt. ACME allows deployement of public-key infrastructure on Internet-facing devices (HTTPS server for example) at very low cost. The library is distributed as a full ANSI C and highly maintainable source code, and is available either as open source (GPLv2, Evaluation) or under a royalty-free commercial license.

More details on CycloneACME

Released on July 16, 2020
Event SIDO 2O20 ORYX ST

ORYX & STMicroelectronics at SIDO 2020

Oryx Embedded will be present alongside STMicroelectronics at the SIDO 2020 trade exhibition in Lyon, France. We would like to invite you to join us at this unique event in Europe combining IoT, IA, Robotics and XR.

SIDO (#SIDO2020) is Europe’s leading event for the convergence of IoT, AI and Robotics technologies. It brings together 11,000 professionals over two days, with more than 450 exhibitors and 80 talks and workshops conducted by 250 speakers. It will be held on 3rd and 4th September 2020 at the Lyon Congress Center.

Published on May 28, 2020
Event EMBEDDDED WORLD 2020 ORYX

ORYX at Embedded World 2020

Oryx Embedded will participate at the annual Embedded World Electronics Conference & Exhibition between 25th-27th February in Nuremberg, Germany. You can meet our team at stand no. 2-216 (Hall 2) along with demonstration projects showcasing our connectivity and security solutions.

Our partners Cynetis Embedded and Ikalogic will also be present at the stand.

Published on February 13, 2020