a2fxxxm3_eth_driver.c File Reference

SmartFusion (A2FxxxM3) Ethernet MAC driver. More...

#include "a2fxxxm3.h"
#include "drivers/mss_ethernet_mac/mss_ethernet_mac_regs.h"
#include "drivers/mss_ethernet_mac/mss_ethernet_mac_desc.h"
#include "core/net.h"
#include "drivers/mac/a2fxxxm3_eth_driver.h"
#include "debug.h"

Go to the source code of this file.

Macros

#define TRACE_LEVEL   NIC_TRACE_LEVEL
 

Functions

error_t a2fxxxm3EthInit (NetInterface *interface)
 A2FxxxM3 Ethernet MAC initialization. More...
 
void a2fxxxm3EthInitDmaDesc (NetInterface *interface)
 Initialize DMA descriptor lists. More...
 
void a2fxxxm3EthTick (NetInterface *interface)
 A2FxxxM3 Ethernet MAC timer handler. More...
 
void a2fxxxm3EthEnableIrq (NetInterface *interface)
 Enable interrupts. More...
 
void a2fxxxm3EthDisableIrq (NetInterface *interface)
 Disable interrupts. More...
 
void EthernetMAC_IRQHandler (void)
 A2FxxxM3 Ethernet MAC interrupt service routine. More...
 
void a2fxxxm3EthEventHandler (NetInterface *interface)
 A2FxxxM3 Ethernet MAC event handler. More...
 
error_t a2fxxxm3EthSendSetup (NetInterface *interface)
 Send a setup frame. More...
 
error_t a2fxxxm3EthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary)
 Send a packet. More...
 
error_t a2fxxxm3EthReceivePacket (NetInterface *interface)
 Receive a packet. More...
 
error_t a2fxxxm3EthUpdateMacAddrFilter (NetInterface *interface)
 Configure MAC address filtering. More...
 
error_t a2fxxxm3EthUpdateMacConfig (NetInterface *interface)
 Adjust MAC configuration parameters for proper operation. More...
 
void a2fxxxm3EthWritePhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data)
 Write PHY register. More...
 
uint16_t a2fxxxm3EthReadPhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr)
 Read PHY register. More...
 
void a2fxxxm3EthWriteSmi (uint32_t data, uint_t length)
 SMI write operation. More...
 
uint32_t a2fxxxm3EthReadSmi (uint_t length)
 SMI read operation. More...
 
uint32_t a2fxxxm3EthCalcCrc (const void *data, size_t length)
 CRC calculation. More...
 

Variables

const NicDriver a2fxxxm3EthDriver
 A2FxxxM3 Ethernet MAC driver. More...
 

Detailed Description

SmartFusion (A2FxxxM3) Ethernet MAC driver.

License

SPDX-License-Identifier: GPL-2.0-or-later

Copyright (C) 2010-2024 Oryx Embedded SARL. All rights reserved.

This file is part of CycloneTCP Open.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Author
Oryx Embedded SARL (www.oryx-embedded.com)
Version
2.4.4

Definition in file a2fxxxm3_eth_driver.c.

Macro Definition Documentation

◆ TRACE_LEVEL

#define TRACE_LEVEL   NIC_TRACE_LEVEL

Definition at line 32 of file a2fxxxm3_eth_driver.c.

Function Documentation

◆ a2fxxxm3EthCalcCrc()

uint32_t a2fxxxm3EthCalcCrc ( const void *  data,
size_t  length 
)

CRC calculation.

Parameters
[in]dataPointer to the data over which to calculate the CRC
[in]lengthNumber of bytes to process
Returns
Resulting CRC value

Definition at line 811 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthDisableIrq()

void a2fxxxm3EthDisableIrq ( NetInterface interface)

Disable interrupts.

Parameters
[in]interfaceUnderlying network interface

Definition at line 305 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthEnableIrq()

void a2fxxxm3EthEnableIrq ( NetInterface interface)

Enable interrupts.

Parameters
[in]interfaceUnderlying network interface

Definition at line 277 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthEventHandler()

void a2fxxxm3EthEventHandler ( NetInterface interface)

A2FxxxM3 Ethernet MAC event handler.

Parameters
[in]interfaceUnderlying network interface

Definition at line 385 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthInit()

error_t a2fxxxm3EthInit ( NetInterface interface)

A2FxxxM3 Ethernet MAC initialization.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 116 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthInitDmaDesc()

void a2fxxxm3EthInitDmaDesc ( NetInterface interface)

Initialize DMA descriptor lists.

Parameters
[in]interfaceUnderlying network interface

Definition at line 196 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthReadPhyReg()

uint16_t a2fxxxm3EthReadPhyReg ( uint8_t  opcode,
uint8_t  phyAddr,
uint8_t  regAddr 
)

Read PHY register.

Parameters
[in]opcodeAccess type (2 bits)
[in]phyAddrPHY address (5 bits)
[in]regAddrRegister address (5 bits)
Returns
Register value

Definition at line 699 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthReadSmi()

uint32_t a2fxxxm3EthReadSmi ( uint_t  length)

SMI read operation.

Parameters
[in]lengthNumber of bits to be read
Returns
Data resulting from the MDIO read operation

Definition at line 772 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthReceivePacket()

error_t a2fxxxm3EthReceivePacket ( NetInterface interface)

Receive a packet.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 512 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthSendPacket()

error_t a2fxxxm3EthSendPacket ( NetInterface interface,
const NetBuffer buffer,
size_t  offset,
NetTxAncillary ancillary 
)

Send a packet.

Parameters
[in]interfaceUnderlying network interface
[in]bufferMulti-part buffer containing the data to send
[in]offsetOffset to the first data byte
[in]ancillaryAdditional options passed to the stack along with the packet
Returns
Error code

Definition at line 455 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthSendSetup()

error_t a2fxxxm3EthSendSetup ( NetInterface interface)

Send a setup frame.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 406 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthTick()

void a2fxxxm3EthTick ( NetInterface interface)

A2FxxxM3 Ethernet MAC timer handler.

This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state

Parameters
[in]interfaceUnderlying network interface

Definition at line 252 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthUpdateMacAddrFilter()

error_t a2fxxxm3EthUpdateMacAddrFilter ( NetInterface interface)

Configure MAC address filtering.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 580 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthUpdateMacConfig()

error_t a2fxxxm3EthUpdateMacConfig ( NetInterface interface)

Adjust MAC configuration parameters for proper operation.

Parameters
[in]interfaceUnderlying network interface
Returns
Error code

Definition at line 623 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthWritePhyReg()

void a2fxxxm3EthWritePhyReg ( uint8_t  opcode,
uint8_t  phyAddr,
uint8_t  regAddr,
uint16_t  data 
)

Write PHY register.

Parameters
[in]opcodeAccess type (2 bits)
[in]phyAddrPHY address (5 bits)
[in]regAddrRegister address (5 bits)
[in]dataRegister value

Definition at line 669 of file a2fxxxm3_eth_driver.c.

◆ a2fxxxm3EthWriteSmi()

void a2fxxxm3EthWriteSmi ( uint32_t  data,
uint_t  length 
)

SMI write operation.

Parameters
[in]dataRaw data to be written
[in]lengthNumber of bits to be written

Definition at line 732 of file a2fxxxm3_eth_driver.c.

◆ EthernetMAC_IRQHandler()

void EthernetMAC_IRQHandler ( void  )

A2FxxxM3 Ethernet MAC interrupt service routine.

Definition at line 332 of file a2fxxxm3_eth_driver.c.

Variable Documentation

◆ a2fxxxm3EthDriver

#define TRUE
Definition: os_port.h:50
error_t a2fxxxm3EthSendPacket(NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary)
Send a packet.
void a2fxxxm3EthEnableIrq(NetInterface *interface)
Enable interrupts.
#define FALSE
Definition: os_port.h:46
uint16_t a2fxxxm3EthReadPhyReg(uint8_t opcode, uint8_t phyAddr, uint8_t regAddr)
Read PHY register.
void a2fxxxm3EthDisableIrq(NetInterface *interface)
Disable interrupts.
void a2fxxxm3EthEventHandler(NetInterface *interface)
A2FxxxM3 Ethernet MAC event handler.
#define ETH_MTU
Definition: ethernet.h:116
void a2fxxxm3EthTick(NetInterface *interface)
A2FxxxM3 Ethernet MAC timer handler.
void a2fxxxm3EthWritePhyReg(uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data)
Write PHY register.
error_t a2fxxxm3EthUpdateMacAddrFilter(NetInterface *interface)
Configure MAC address filtering.
error_t a2fxxxm3EthUpdateMacConfig(NetInterface *interface)
Adjust MAC configuration parameters for proper operation.
error_t a2fxxxm3EthInit(NetInterface *interface)
A2FxxxM3 Ethernet MAC initialization.
@ NIC_TYPE_ETHERNET
Ethernet interface.
Definition: nic.h:83