LPC1758 Ethernet MAC driver. More...
#include "lpc17xx.h"
#include "core/net.h"
#include "drivers/mac/lpc175x_eth_driver.h"
#include "debug.h"
Go to the source code of this file.
Macros | |
#define | TRACE_LEVEL NIC_TRACE_LEVEL |
Functions | |
error_t | lpc175xEthInit (NetInterface *interface) |
LPC175x Ethernet MAC initialization. More... | |
__weak_func void | lpc175xEthInitGpio (NetInterface *interface) |
GPIO configuration. More... | |
void | lpc175xEthInitDesc (NetInterface *interface) |
Initialize TX and RX descriptors. More... | |
void | lpc175xEthTick (NetInterface *interface) |
LPC175x Ethernet MAC timer handler. More... | |
void | lpc175xEthEnableIrq (NetInterface *interface) |
Enable interrupts. More... | |
void | lpc175xEthDisableIrq (NetInterface *interface) |
Disable interrupts. More... | |
void | ENET_IRQHandler (void) |
LPC175x Ethernet MAC interrupt service routine. More... | |
void | lpc175xEthEventHandler (NetInterface *interface) |
LPC175x Ethernet MAC event handler. More... | |
error_t | lpc175xEthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary) |
Send a packet. More... | |
error_t | lpc175xEthReceivePacket (NetInterface *interface) |
Receive a packet. More... | |
error_t | lpc175xEthUpdateMacAddrFilter (NetInterface *interface) |
Configure MAC address filtering. More... | |
error_t | lpc175xEthUpdateMacConfig (NetInterface *interface) |
Adjust MAC configuration parameters for proper operation. More... | |
void | lpc175xEthWritePhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data) |
Write PHY register. More... | |
uint16_t | lpc175xEthReadPhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr) |
Read PHY register. More... | |
void | lpc175xEthWriteSmi (uint32_t data, uint_t length) |
SMI write operation. More... | |
uint32_t | lpc175xEthReadSmi (uint_t length) |
SMI read operation. More... | |
uint32_t | lpc175xEthCalcCrc (const void *data, size_t length) |
CRC calculation. More... | |
Variables | |
const NicDriver | lpc175xEthDriver |
LPC175x Ethernet MAC driver. More... | |
Detailed Description
LPC1758 Ethernet MAC driver.
License
SPDX-License-Identifier: GPL-2.0-or-later
Copyright (C) 2010-2024 Oryx Embedded SARL. All rights reserved.
This file is part of CycloneTCP Open.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- Version
- 2.4.4
Definition in file lpc175x_eth_driver.c.
Macro Definition Documentation
◆ TRACE_LEVEL
#define TRACE_LEVEL NIC_TRACE_LEVEL |
Definition at line 32 of file lpc175x_eth_driver.c.
Function Documentation
◆ ENET_IRQHandler()
void ENET_IRQHandler | ( | void | ) |
LPC175x Ethernet MAC interrupt service routine.
Definition at line 387 of file lpc175x_eth_driver.c.
◆ lpc175xEthCalcCrc()
uint32_t lpc175xEthCalcCrc | ( | const void * | data, |
size_t | length | ||
) |
CRC calculation.
- Parameters
-
[in] data Pointer to the data over which to calculate the CRC [in] length Number of bytes to process
- Returns
- Resulting CRC value
Definition at line 864 of file lpc175x_eth_driver.c.
◆ lpc175xEthDisableIrq()
void lpc175xEthDisableIrq | ( | NetInterface * | interface | ) |
Disable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 360 of file lpc175x_eth_driver.c.
◆ lpc175xEthEnableIrq()
void lpc175xEthEnableIrq | ( | NetInterface * | interface | ) |
Enable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 332 of file lpc175x_eth_driver.c.
◆ lpc175xEthEventHandler()
void lpc175xEthEventHandler | ( | NetInterface * | interface | ) |
LPC175x Ethernet MAC event handler.
- Parameters
-
[in] interface Underlying network interface
Definition at line 447 of file lpc175x_eth_driver.c.
◆ lpc175xEthInit()
error_t lpc175xEthInit | ( | NetInterface * | interface | ) |
LPC175x Ethernet MAC initialization.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 121 of file lpc175x_eth_driver.c.
◆ lpc175xEthInitDesc()
void lpc175xEthInitDesc | ( | NetInterface * | interface | ) |
Initialize TX and RX descriptors.
- Parameters
-
[in] interface Underlying network interface
Definition at line 256 of file lpc175x_eth_driver.c.
◆ lpc175xEthInitGpio()
__weak_func void lpc175xEthInitGpio | ( | NetInterface * | interface | ) |
GPIO configuration.
- Parameters
-
[in] interface Underlying network interface
Definition at line 225 of file lpc175x_eth_driver.c.
◆ lpc175xEthReadPhyReg()
uint16_t lpc175xEthReadPhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr | ||
) |
Read PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits)
- Returns
- Register value
Definition at line 752 of file lpc175x_eth_driver.c.
◆ lpc175xEthReadSmi()
uint32_t lpc175xEthReadSmi | ( | uint_t | length | ) |
SMI read operation.
- Parameters
-
[in] length Number of bits to be read
- Returns
- Data resulting from the MDIO read operation
Definition at line 825 of file lpc175x_eth_driver.c.
◆ lpc175xEthReceivePacket()
error_t lpc175xEthReceivePacket | ( | NetInterface * | interface | ) |
Receive a packet.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 568 of file lpc175x_eth_driver.c.
◆ lpc175xEthSendPacket()
error_t lpc175xEthSendPacket | ( | NetInterface * | interface, |
const NetBuffer * | buffer, | ||
size_t | offset, | ||
NetTxAncillary * | ancillary | ||
) |
Send a packet.
- Parameters
-
[in] interface Underlying network interface [in] buffer Multi-part buffer containing the data to send [in] offset Offset to the first data byte [in] ancillary Additional options passed to the stack along with the packet
- Returns
- Error code
Definition at line 482 of file lpc175x_eth_driver.c.
◆ lpc175xEthTick()
void lpc175xEthTick | ( | NetInterface * | interface | ) |
LPC175x Ethernet MAC timer handler.
This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state
- Parameters
-
[in] interface Underlying network interface
Definition at line 307 of file lpc175x_eth_driver.c.
◆ lpc175xEthUpdateMacAddrFilter()
error_t lpc175xEthUpdateMacAddrFilter | ( | NetInterface * | interface | ) |
Configure MAC address filtering.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 621 of file lpc175x_eth_driver.c.
◆ lpc175xEthUpdateMacConfig()
error_t lpc175xEthUpdateMacConfig | ( | NetInterface * | interface | ) |
Adjust MAC configuration parameters for proper operation.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 679 of file lpc175x_eth_driver.c.
◆ lpc175xEthWritePhyReg()
void lpc175xEthWritePhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr, | ||
uint16_t | data | ||
) |
Write PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits) [in] data Register value
Definition at line 722 of file lpc175x_eth_driver.c.
◆ lpc175xEthWriteSmi()
void lpc175xEthWriteSmi | ( | uint32_t | data, |
uint_t | length | ||
) |
SMI write operation.
- Parameters
-
[in] data Raw data to be written [in] length Number of bits to be written
Definition at line 785 of file lpc175x_eth_driver.c.